D Bass Reg reed playing flat

A forum to discuss the arcane art of making uilleann pipes, reeds, and set maintenance.

Moderators: the plod, dropkick

Post Reply
User avatar
FergMaun
Posts: 145
Joined: Tue Apr 05, 2005 5:42 pm
Location: Belfast Ireland

D Bass Reg reed playing flat

Post by FergMaun » Tue Feb 01, 2011 8:19 pm

I made a D bass reg reed for my Andreas Rogge Full set September 2010 in Belfast Ireland.

Head L = 33mm
Head W = 13mm
Scrape L = 27mm
Tails L = 25mm
Staple L = 45mm
Staple = 5mm od x 4mm id
Staple inserted tails at = 20mm
Binding L = 25mm
Bridle K&S Copper Sheet 0.64mm
Bridle placement = 10mm above binding
OAL = 83mm

September 2010 I got Andreas to change the bass reg reed seat that was fitted with brass tubing 4mm od x 3.2mm id staple to fitted staples 5mm od x 4mm id

The above reed I made is playing flat overall of D (A=440) below -20 on the Korg Chromatic Tuner.
When my Tenor/baritone reg reeds is flat and the reed is all the way in the reed seat I file/cut wee bit of bottom of staple.

As this is a good reed it needs to be shorten 1) shorten staple or 2) trim reed lips.

Since I got my full set from Andreas I have not used the Detachable Bass-Regulator as I use the set as a 3/4 set.

Cheers

Ferg
Last edited by FergMaun on Thu Feb 03, 2011 4:19 pm, edited 1 time in total.

outofthebox
Posts: 630
Joined: Fri Oct 30, 2009 2:02 pm

Re: D Bass Reg reed playing flat

Post by outofthebox » Thu Feb 03, 2011 5:54 am

Have you tried moving the bridle up a little towards the lips? The big bass regulator reeds have a larger bridle zone. That might be enough to bring it up to the desired pitch, before making any major alterations.

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests